Maple Max Fuel Injector Cleaner

Features

Using this product brings several technical and economic benefits to your vehicle, distinguishing it from other similar products:

• Safe and Standard Formulation: Safe for oxygen sensors and catalytic converters (Catalytic Converter Safe).
• Fast-Acting and Deep Penetration: Instantly dissolves stickiness, gum, varnish, and hardened carbon deposits.
• Significant Engine Performance Improvement: Enhances vehicle acceleration, ensures smoother engine operation, and eliminates rough idling.
• Reduced Fuel Consumption and Emissions: By correcting the fuel spray pattern, combustion becomes more complete, reducing the emission of toxic exhaust gases.
• Easy to Use: Ergonomic spray design with a special straw for precisely directing the fluid into inaccessible areas.

Prevention of Part Wear: With regular cleaning, the lifespan of fuel injectors and the IAC valve is significantly increased.

Applications:

Thanks to its multi-purpose formulation, Maple Max Injector Cleaner can be used in various parts of the combustion and fuel systems. The primary applications include:

• Cleaning and Descaling Fuel Injectors: Complete clearing of the fuel injection pathways.
• Cleaning the Throttle Body: Removing sticking and contamination from the throttle plate to regulate air intake.
• Cleaning the Carburetor System: Suitable for washing jets, internal passages, and the external surface of carburetors in older vehicles and motorcycles.
• Cleaning the Intake Manifold and Idle Air Control (IAC) Valve: Removing soot and grease that cause engine RPM fluctuations (unwarranted revving).
• Cleaning Valves and the Combustion Chamber: Eliminating carbon deposits that cause engine knock.

How to Use:

To achieve the best results and prevent damage to components, follow these steps carefully:

1. Preparation: First, turn off the engine and allow it to cool down partially.
2. Opening the Pathway: Disconnect the air intake hose attached to the throttle body to access the throttle plate.
3. Initial Spraying: Attach the special straw to the spray nozzle and apply some Maple Max Injector Cleaner onto the throttle plate, walls, and IAC valve. Let it sit for a few minutes to soften the deposits.
4. Starting the Engine: Start the vehicle’s engine (the vehicle may start with a slight delay due to the fluid entering the system, which is normal).
5. Completing the Wash: While the engine is running, manually open the throttle to increase the RPM (around $2000$ to $3000$ RPM) while simultaneously spraying the fluid into the throttle body. Continue this until it is completely clean and the dissolved soot exits the exhaust.
6. Reassembly: Once finished, turn off the engine and carefully secure the air intake hose back in its place.

Note: For a professional cleaning of fuel injectors, it is recommended to use specialized injector cleaning machines with this solution at auto repair shops.

Expiration Date:

As printed on the product can. Store in a dry place at a temperature of +5°C to +25°C.

Special Note:

Given the chemical composition and pressurized structure of the spray, observing the following points is mandatory:

• Highly Flammable: This spray contains highly flammable substances. Never spray near open flames, sparks, or extremely hot components (such as a fully heated exhaust manifold).
• Eye and Skin Protection: In case of contact with the eyes, flush immediately with plenty of water and seek medical advice. Wearing work gloves and safety glasses is recommended.
• Damage to Vehicle Paint: This solution is a powerful solvent; be careful not to spill it on the vehicle’s body paint or decorative plastic parts. If contact occurs, wash immediately with water.
• Storage Conditions: The spray can is pressurized. Store it at temperatures below $50$°C, away from direct sunlight, and out of reach of children.
• Adequate Ventilation: Perform the cleaning operation outdoors or in a highly ventilated area to avoid inhaling the emitted fumes.